
Tubos Retráctiles FIT-221-1/2
Tubos Retráctiles FIT-221-1/2

This picture is representative only and may not match the specific configuration of the product listed on this page. Please refer to the product specifications for more information on this part number and its exact configuration.
Nuestros tubos termoretráctiles FIT ofrecen una manera confiable para proteger y sellar las terminaciones o agregar solidez mecánica adicional. Los productos termorretráctiles FIT preferidos están fabricados con compuestos de primera calidad con los controles de fabricación más rigurosos. Esto significa que la familia de productos FIT tendrá siempre excelentes características físicas como una baja contracción longitudinal y amplios rangos de temperatura, a la vez, brinda un aspecto elegante cuando se le utiliza solo o en equipos OEM.
Construction
1) Tubing Type | Heat Shrinkable Tubing |
2) Tubing Material | Cross Linked Polyolefin |
3) Minimum Supplied ID(In) | 0.500 |
4) Maximum Recovered ID (In) | 0.250 |
5) Nominal Recovered Wall Thickness(In) | 0.025 |
6) Color(s) | BLACK, WHITE, CLEAR, RED, YELLOW, BLUE, GREEN, ORANGE |
Applicable Specifications
1) UL | Standard 224 (Except Clear) 600V | |
2) CSA International | Standard 198 (Except Clear) 600V | |
3) Other | AMS-DTL-23053/5 Class 1 (Except Clear) | |
AMS-DTL-23053/5 Class 2 (Clear Only) |
Environmental
1) EU Directive 2011/65/EU(RoHS2): | ||
All materials used in the manufacture of this part are in compliance with European Directive 2011/65/EU regarding the restriction of use of certain hazardous substances in electrical and electronic equipment. Consult Alpha Wire's web site for RoHS C of C. | ||
2) REACH Regulation (EC 1907/2006): | ||
This product does not contain Substances of Very High Concern (SVHC) listed on the European Union's REACH candidate list in excess of 0.1% mass of the item. For up-to-date information, please see Alpha's REACH SVHC Declaration. | ||
3) California Proposition 65: | The outer surface materials used in the manufacture of this part meet the requirements of California Proposition 65. |
Properties
Physical & Mechanical Properties | ||
---|---|---|
1) Temperature Range | -55 to 135°C | |
2) Shrink Ratio | Approximately 2:1 | |
3) Full Recovery Temperature | 121°C | |
4) Minimum Shrink Temperature | 90°C | |
5) Tensile Strength | 1500psi, Min | ASTM D638 |
6) Elongation | 200%, Min | ASTM D638 |
7) Low Temperature Flex(-55°C) | no cracking | AMS-DTL-23053 |
8) Heat Shock(250°C,4hrs) | no cracking | AMS-DTL-23053 |
9) Secant Modulus | 2.5x10 4 psi, Min | ASTM D882 |
10) Longitudinal Change | +/-5% | AMS-DTL-23053 |
11) Specific Gravity(Colors) | 1.35, Max | ASTM D792 |
Specific Gravity(Clear) | 1.00, Max | |
12) Shelf Life | 5 Years @ 18 to 35°C | |
Electrical Properties | ||
1) Dielectric Strength | 500 V/mil, Min | ASTM D876 |
2) Volume Resistivity | 1x10 14 ohm-cm, Min | ASTM D876 |
Chemical Properties | ||
1) Water Absorption | 0.50%, Max | ASTM D570 |
2) Corrosion(0°C,16hrs) | no corrosion | AMS-DTL-23053 |
3) Fluid Resistance(23°C,24 Hrs) | 1000 PSI, Min | AMS-DTL-23053 |
4) Fungus Resistance | Pass | AMS-DTL-23053 |
5) Vacuum Outgassing - CVCM | 0.10%, Max | ASTM E595 |
6) Halogen Free | No | |
7) Lead Free | Yes |
Other
Packaging | |
1) 150 FT | CR6.5-6: 6.5 x 6 x 3.25 Max. 3 pieces/Min length 25 FT. |
2) 50 FT | CR6.5-3: 6.5 x 3 x 3.25 Continuous length |
3) 32 FT | CR10-2: 10 x 2 x 6 Continuous length |
4) 5X4 FT | FIT 2X2: 2 x 2 x 49 Continuous length |
5) 14X6 IN | PLASTIC BAG Continuous length |
Notes | |
---|---|
1) Orange available for 1/2 - 150 ft, 3/4 - 250 ft, 1IN - 250 ft, 11/2IN - 125Ft and 2IN - 125 ft sizes. |
About Us

Make Alpha Wire Your First Choice for Reliable Performance
No matter how demanding the environment, you want a cable with the performance and reliability to put your mind at ease.