CHOOSE
ALPHA ALUMINUM
POLYESTER FOIL SHIELDING FOR:
- Lightweight
Shielding
- Low Cost
- Ease of Termination
with Use of Stranded
- Tinned Copper
Drain Wire
- Low Frequency
Interference Applications
- 100% Coverage
Over the Core of Cable Conductors
 Alpha
Aluminum/Polyester foil shielding consists of an aluminum
polyester tape, foil side facing inward, with a 25% overlap
and in contact with a stranded, tinned copper Drain Wire equal
in size to insulated cable conductors.
|
CHOOSE
XTRA•GUARD® FLEXIBLE
CABLE BRAID SHIELDING FOR:
- EMI/RFI Resistance
in Power, Control and Data Applications
- Continuous
Shield
Continuity in Flexing Applications
- High Physical
Strength
 XTRA•GUARD® Flexible Cables
have specific shielding requirements resulting from the stresses
of motion and flexing. Where foil shields will tear and lose
continuity, XTRA•GUARD® Flexible Cables use a flexible,
85% coverage, tinned copper braid with a double jacket isolating
the shield from the cable's inner core.
|
Alpha SUPERSHIELD™ (foil/braid) shielding system consists
of a unique triple-laminate tape. An aluminum/polyester/aluminum
tape is bonded in one layer with a 25% overlap and in
contact with a stranded tinned copper Drain Wire equal
in size to the insulated cable conductors. A 70% coverage
tinned copper braid shield is applied overall.
