Wire, Cable and Tubing Solutions from Alpha Wire Company
   








  
        DISCONTINUED
LOCAL AREA NETWORK
RS-232-C PRE-TERMINATED ASSEMBLIES

RoHS COMPLIANT
300 VOLT, 80°C



  RS-232-C PRE-TERMINATED
ASSEMBLIES APPLICATIONS:
  • General Purpose EIA RS-232-C Extensions
  • Modem Control and Error Detection
  CHARACTERISTICS
Operating Temperature:
  • -20° C to 80°C
  Voltage Rating:
  • 300 Volt
  Color Description:
  • Refer to Color Description Chart Below
  Product Description:
  • 25 Cabled Conductors:  #22 AWG -
    (0,36mm²), 7/30 (7x0,25mm), Tinned Copper
  • 0.009" (0,23mm) Color-Coded SR-PVC Insulation
  • Aluminum/Polyester Foil Shield with Stranded Tinned
    Copper Drain Wire
  • Gray PVC Jacket; Wall Thickness: 0.032" (0,81mm)
  • O.D.:  0.380" (9,65mm), Nominal
  • Connectors:
    Current Rating:  4.0 Amps/Contact (with #22 AWG Conductor)
    Dielectric Withstand Voltage:  1000 Volt s, Minimum
    Contacts:  Gold Over Nickel Plated Beryllium Copper
    No. of Positions:  25 (Pins or Sockets)
  • Cord Configuration:
    Male Connector, Each End, Fully Pinned
    Male Connector to a Female Connector, Fully Pinned
  • Electrical Specifications:
    Capacitance:  35 pF/ft. (115 pF/m), Nominal
    Impedance:  50 Ohms, Nominal
    Shielding :  Pin-to-Pin Shielded
SPECIFICATIONS
  • UL Type CM, AWM 2464 - Alpha Part No. 5199/25C
  • CSA CMG FT4-Alpha Part No. 5199/25C
  • RoHS Compliant

AVAILABILITY
  • 1 piece package
1
Alpha Wire molded and tested RS-232-C data cable assemblies are designed to meet the requirements of the EIA RS-232 specification.   Compliance with the requirements of this specification assures the end user high quality intra-system transmission of signals between the computer memory and peripherals such as printers, VDU's and other ancillary equipment under RS-232-C guidelines.   These molded assemblies have improved cable strain relief over conventional RS-232-C cable assemblies.
*Most terminal interfaces conform to the Electronic Industries Association standard RS-232-C.  This standard specifies a 25-pin connector with numbered pin assignments for data (transmit and receive), Ground, control and timing circuits.  The RS-232-C specification limits cable lengths to 50 feet or less because of capacitance limitations, but provides the greatest flexiblity in equipment selection.

image 254a
image 254b

MALE-TO-FEMALE ASSEMBLIES/LENGTHS
Alpha
Part No.
Ft. m
DCA_522A-6  
DCA_522A-10  
DCA_522A-15  
DCA_522A-25  
DCA_522A-50  

6     
10    
15    
25    
50    

1,8   
3,0   
4,6   
7,6   
15,2  


MALE-TO-MALE ASSEMBLIES/LENGTHS
Alpha
Part No.
Ft. m
DCA_512A-6  
DCA_512A-10  
DCA_512A-15  
DCA_512A-25  
DCA_512A-50  

6     
10    
15    
25    
50    

1,8   
3,0   
4,6   
7,6   
15,2  


BULK CABLE/STANDARD PUT-UPS
Alpha
Part No.
Ft. m
5199/25C  
5199/25C  
5199/25C  

100     
500     
1000    

30,5    
152,4   
305,0   


COLOR DESCRIPTION CHART
No. Base
Color
1st
Stripe
2nd
Stripe
No. Base
Color
1st
Stripe
2nd
Stripe
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
Black
Brown
Red
Orange
Yellow
Green
Blue
Violet
Gray
White
White
White
White
-
-
-
-
-
-
-
-
-
-
Black
Brown
Red
-
-
-
-
-
-
-
-
-
-
-
-
-
14 -
15 -
16 -
17 -
18 -
19 -
20 -
21 -
22 -
23 -
24 -
25 -
White
White
White
White
White
White
White
White
White
White
White
White
Orange
Yellow
Green
Blue
Violet
Gray
Black
Black
Black
Black
Black
Black
-
-
-
-
-
-
Brown
Red
Orange
Yellow
Green
Blue


 
Email: info@alphawire.com
Toll Free: 1-800-52 ALPHA | Telephone: 908-925-8000 | Fax: 908-925-6923
Europe/UK Telephone: +44 (0) 800 288 8809 | Europe/UK Fax: +44 (0) 1932 772433
 
 

Master Catalog Page
Previous
274
Previous

Alpha Wire Company

Copyright © 2008 Alpha Wire Company ALL RIGHTS RESERVED.

Use of this Web Site indicates you accept the Terms of Use
listed in the Legal Information and Terms Of Use Document.