Wire, Cable and Tubing Solutions from Alpha Wire Company
   








  
 

FIT® PREFERRED HEAT SHRINK PRODUCTS
SHRINKABLE NYLON CRIMP SPLICES
FIT®-CRIMP
RoHS COMPLIANT




CHOOSE FIT®-CRIMPS FOR:
  • Water and Corrosion resistant protection
  • Strain relief
  FIT® CRIMP APPLICATIONS:
  • Marine Electronics/Electrical
    Connections
  • Appliance Manufacturing
  • Mass Transit Wiring Systems
  • Petroleum/Chemical Industries
CHARACTERISTICS:
Operating Temperature:
  • -55ºC to 125ºC
Shrinkage Ratio :
  • Approximately 2  to 1 at 180ºC
Color Description:
  • FIT® CRIMP 1: Red
  • FIT® CRIMP 2: Blue
  • FIT® CRIMP 3: Yellow
Physical Properties:
  • Cut-Through Resistance :
    70 Lbs. (31 kg)
  • Wire pullout:
    FIT® CRIMP 1: 25 Lbs. (11 kg)
    FIT® CRIMP 2: 50 Lbs. (23 kg)
    FIT® CRIMP 3: 60 Lbs. (27 kg)
  • Heat Aging: 168 Hours at 160ºC,
    No Cracking
  • Not flame retardant
  Chemical Properties:
  • Solvent Resistance : Isopropyl
    Alcohol, Trichloroethylene,
    Gasoline, Battery Acid, Diesel Fuel,
    Motor Oil, Anti-Freeze, Brake Fluid,
    5% Salt Water
  Electrical Properties:
  • Dielectric Strength: 2500 Volt
  • Insulation Resistance : 103 megohms
symcsa.jpg (3134 bytes) 
*After crimping and recovery
  SPECIFICATIONS:
  • RoHS Compliant
124

124acopy.jpg (21885 bytes)

Alpha
Part No.
AWG Range
of Barrel

Min.

Max.

Minimum
Supplied I.D.

Inches

mm

Maximum
Rec. I.D.

Inches

mm

Standard.
Package
Pieces

FIT CRIMP 1  
FIT CRIMP 2  
FIT CRIMP 3  

22  
16  
12  

18  
14  
10  

0.145   
0.180   
0.250   

3,86    
4,57    
6,35    

0.060   
0.080   
0.118   

1,52    
2,03    
2,99    

25, 100, 500  
25, 100, 500  
25, 100, 500  


ENVIROMENTALLY SEALED,
BUTT CONNECTIONS

Alpha’s heat-shrinkable pre-insulated crimp
Splices completely seal electrical connections
from Corrosion caused by water, salts and other
contaminants. Unlike conventional Splices, these
adhesive-lined butt connectors provide a strong
reinforced connection. They are lightweight and
easy to install, too. Simply insert the wires. The
sleeve's transparent nylon Insulation lets you inspect
wire location and position your crimping tool fast.
Crimp the Splice and then shrink and seal it with a
common heat gun or other heat source. Reliable
sealing plus quick and easy installation add up to
protection you can count on whenever wire splices
are required, including automobile and truck wiring,
outdoor electrical equipment, marine equipment,
telecommunications equipment, recreational equipment
and household appliances.
*For details on the Alpha AT-255 Crimp Tool, see page 286
 
Email: info@alphawire.com
Toll Free: 1-800-52 ALPHA | Telephone: 908-925-8000 | Fax: 908-925-6923
Europe/UK Telephone: +44 (0) 800 288 8809 | Europe/UK Fax: +44 (0) 1932 772433
 
 

Master Catalog Page
Previous
144
Previous

Alpha Wire Company

Copyright © 2008 Alpha Wire Company ALL RIGHTS RESERVED.

Use of this Web Site indicates you accept the Terms of Use
listed in the Legal Information and Terms Of Use Document.