• Bonding to Substrates
• Similar to FIT-221 with Adhesive Liner
• Total Encapsulation
• Reduced Diameters
• Permanent Water & Corrosion Protection
• Internal Isolation of Individual Substrates- "Pinching"
• Use with XTRA•GUARD® 2

• Moisture Protection of Substrates
• Permanent Sealing of Substrates
• Wire Isolation Within a Harness
• Permanent Joint Splice Repair
• General Purpose Usage with Adhesive
• XTRA•GUARD® 2 Applications

• -55ºC to 110ºC

• Approximately 2 to 1 at 121ºC

• All Standard Packages: Black

• Tensile Strength: 1500 psi, (106 kg/cm²)
• Ultimate Elongation: 200%,
• Longitudinal Shrinkage: -10%
• Specific Gravity: 1.35
• Flammability: Self-Extinguishing (Outer Jacket Only)
• Nominal Recovered Adhesive Thickness: .005" to 0.011" (0,13mm to 0,28mm))

• Corrosive Effect: Non-Corrosive
• Fungus Resistance : Does Not Support Growth
• Water Absorbation : 0.5%

• Dielectric Strength: 400V/mil (158 kV/cm)
• Volume Resistivity : 10¹² ohm-cm

• MIL-DTL-23053/4D, Class 2
• UL Standard 224
• RoHS Compliant

 

Alpha Part No. And Size Minimum Supplied I.D. Inches mm Std. Nom. Rec. I.D. Inches mm Nom. Rec. Wall Thickness Inches mm Std. Pkg. 4 Ft. Lengths Total Ftg. FIT-750-1/4 FIT-750-3/8 FIT-750-1/2 FIT-750-3/4 FIT-750-1 FIT-750-1-1/2 0.250 0.375 0.500 0.750 1.000 1.500 6,35 9,53 12,70 19,00 25,40 38,10 0.125 0.187 0.250 0.375 0.500 0.750 3,18 4,75 6,35 9,53 12,70 19,00 0.030 0.031 0.032 0.037 0.039 0.046 0,76 0,78 0,81 0,94 0,99 1,17 100 100 20 20 20 20