(Ctrl+Click if PDF doesn't appear)
||Tinned Copper, per ASTMB-33 and CID-A-A-59551|
|2) Braid Data
|a) Nominal ID
|b) AWG of Ends
|c) Number of Carriers
|d) Nominal Percent Coverage
|e) Total Number of Ends
|f) Approx. Equiv. AWG
|g) Approx. Ampacity
||41 Amps |
|h) Federal Spec Number
|1) EU Directive 2011/65/EU(RoHS2):
||All materials used in the manufacture of this part meet the requirements of European Directive 2011/65/EU regarding the restriction of use of certain hazardous substances in electrical and electronic equipment. No Exemptions are required for RoHS Compliance on this item. Consult Alpha Wire's web site for RoHS C of C.
|2) REACH Regulation (EC 1907/2006):
||This product does not contain any of the 16 substances listed on the European Union's REACH Substance of Very High Concern (SVHC) candidate list in excess of 0.1% mass of the item.
|3)California Proposition 65:
||The outer surface materials used in the manufacture of this part meet the requirements of California Proposition 65.
|a) 100 ft.
||9 x 4.5 x 3.5, Continuous |
|b) 500 ft.
||12 x 6 x 3.5, 3 Pieces Max., 25 ft. Min. Length |
||Spool size may vary slightly|
Alpha braid is an exceptional, low resistance way to create a point-to-point ground strap. In retrofit applications, braid is an ideal way to install additional shielding to your cable.